उत्पाद जानकारी पर जाएं
1 का 2

Wheel Bearing Kit (1211) - Front - Suzuki V-strom 650 (2017-22) - All Balls Racing

एसकेयू:25-1211

नियमित रूप से मूल्य M.R.P. ₹ 1,750.00 inclusive of all taxes
नियमित रूप से मूल्य विक्रय कीमत M.R.P. ₹ 1,750.00 inclusive of all taxes
बिक्री ऑर्डर करने के लिए हमसे संपर्क करें

कम स्टॉक: 1 शेष

पूरा विवरण देखें

All Balls Racing Premium Wheel Bearing & Seal Kit

ABEC 3 High-Speed Precision Bearings | Triple-Lip Rubber Seals | Chevron SRI-2 Oxidation Protection

Restore smooth rolling performance, eliminate wheel wobble, and protect your motorcycle or ATV hub with the All Balls Racing Premium Wheel Bearing & Seal Kit. Engineered to outperform OEM standards, this high-speed bearing kit is the ultimate upgrade for riders demanding maximum durability in harsh off-road, track, or street environments.

Every component is precision-matched to prevent environmental contamination, ensuring your axles spin effortlessly through mud, dust, water, and sand.

Key Features & Engineering Performance

  • ABEC 3 Precision Manufacturing: Built to stringent ABEC 3 high-speed tolerances, reducing internal friction, heat generation, and rolling resistance for ultra-smooth operation.

  • Triple-Lip Protective Rubber Seals: Outfitted with specialized triple-lip outer rubber seals that create a physical barrier—locking essential grease inside the bearing while keeping destroying elements like water, silt, and grime out.

  • Chevron SRI-2 Performance Grease: Factory-packed with premium Chevron SRI 2 premium lubricant, formulated with advanced rust and oxidation inhibitors to protect the internal steel balls under intense mechanical heat.

  • Complete Hub Overhaul Kit: Contains everything needed to refresh a single wheel hub assembly in one convenient package.

Kit Inclusions & Components

Component Description Quantity Per Kit Primary Material / Technology
Premium Ball Bearings 2 High-Tensile Steel Alloy (ABEC 3 Rated)
Heavy-Duty Wheel Seals 3 Nitrile Rubber (Triple-Lip Protection)

Critical Pre-Installation Inspection Guide

To guarantee maximum component lifespan, thoroughly inspect your factory wheel assembly parts before pressing in your new All Balls Racing kit:

  • 1. Inner Center Spacer Check: Clean the internal bore to ensure the axle slide passes through without binding. Inspect both square ends for burrs or flattening. If your previous bearings failed catastrophically, verify that the center spacer wasn't crushed or shortened; it must be equal to or slightly longer than the bearing stops inside the hub.

  • 2. Wheel Hub Prep: Carefully wipe out all residual grit, corrosion, and old grease from the hub shell. Warning: Do not sand or remove raw hub metal, as this will widen tolerances and ruin the tight press-fit of the new bearing.

  • 3. Outer Wheel Spacers: Clean external spacers and check the outer surfaces where they interface with the rubber seal lips. Deeply grooved, pitted, or worn spacers will tear new seals immediately and should be replaced.

Professional Bearing Installation Best Practices

⚠️ Note 1 (Avoid Force Damage): Improper installation techniques (such as striking the inner bearing race directly) will cause immediate internal dimpling (brinelling), dramatically shortening bearing life. Always press on the outer race only.

🔥 Note 2 (Thermal Expansion Trick): Gently heating the aluminum wheel hub with a heat gun will cause the metal housing to expand slightly. This thermal expansion allows the cold bearing to seat effortlessly into position with minimal mechanical friction.

Stop riding on gritty, worn-out hubs. Restore factory handling stability by ordering your All Balls Racing Wheel Bearing Kit from Bikenbiker today!


Country of Origin: United States of America
Generic Name: Steering & Wheel Maintenance
Quantity: 2N
Country of Import: United States of America
Warranty: 30 DAYS FROM DATE OF INVOICE
Best Use Before: 10 years from date of manufacture
Importer Address: Plusgrow Merchantry Pvt Ltd Bharti House, 43 Kachipura, New Ramdaspeth, Nagpur, MH 440010 Contact Customer Service Manager (at above address) Phone: +91 844 844 9050 Email: customercare@bikenbiker.com

नया जोड़ा गया

1 का 25