• Husqvarna Te510 Spares - Wheel Bearing Kits All Balls Racing Kit
1 1

Husqvarna TE510 Spares - Wheel Bearing Kits - All Balls Racing

25-1415

M.R.P. ₹ 2,300.00 inclusive of all taxes
M.R.P. ₹ 2,300.00 inclusive of all taxes
Sale Contact Us to Order
Style

Out of stock

Husqvarna TE510 Spares - Wheel Bearing Kits

All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilising a Chevron SRI 2 grease that contains rust and oxidation inhibitors.

 

Installation Inspection

Inner Spacer:

Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the centre spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.

 



Wheel Hub:

Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit.

Outer Wheel Spacers:

Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced.

Brand - All Balls Racing


Country of Origin: CHINA
Generic Name: Steering & Wheel Maintenance
Quantity: 8N
Country of Import: UNITED STATES OF AMERICA
Warranty: 30 DAYS FROM DATE OF INVOICE
Best Use Before: 10 years from date of manufacture
Importer Address: Plusgrow Merchantry Pvt Ltd Bharti House, 43 Kachipura, New Ramdaspeth, Nagpur, MH 440010 Contact Customer Service Manager (at above address) Phone: +919373788088 Email - connect@plusgrow.com
--> View full details

Husqvarna TE510 Spares - Wheel Bearing Kits

All Balls Racing Wheel Bearings feature High-Speed bearings that are manufactured to ABEC 3 precision levels, triple lip rubber seals that keep the grease in and the water and dirt out all while utilising a Chevron SRI 2 grease that contains rust and oxidation inhibitors.

 

Installation Inspection

Inner Spacer:

Check the bore to make certain it is clean and the axle easily passes through it. Check each end for wear and burrs. The edges must be square to seat properly against the new bearings. If the old bearings failed it is a good idea to confirm that the centre spacer has not been damaged. Make sure the inner space is the same length or slightly longer than the bearing stops in the hub or carrier.

 



Wheel Hub:

Clean the hub, removing any dirt and corrosion. Make certain not to remove metal. This will adversely affect bearing fit.

Outer Wheel Spacers:

Clean the outer wheel spacers and inspect them for wear on either end as well as wear on the outer surface where it makes contact with the seal. If the spacers are excessively worn they should be replaced.

Brand - All Balls Racing


Country of Origin: CHINA
Generic Name: Steering & Wheel Maintenance
Quantity: 8N
Country of Import: UNITED STATES OF AMERICA
Warranty: 30 DAYS FROM DATE OF INVOICE
Best Use Before: 10 years from date of manufacture
Importer Address: Plusgrow Merchantry Pvt Ltd Bharti House, 43 Kachipura, New Ramdaspeth, Nagpur, MH 440010 Contact Customer Service Manager (at above address) Phone: +919373788088 Email - connect@plusgrow.com

Newly Added

1 25
View all