1 1

Chain Lubricant 150 ml - HP Vaahn

HPV-B003

M.R.P. ₹ 259.00 inclusive of all taxes
M.R.P. ₹ 259.00 inclusive of all taxes
ಮಾರಾಟ ಆರ್ಡರ್ ಮಾಡಲು ನಮ್ಮನ್ನು ಸಂಪರ್ಕಿಸಿ

ಸ್ಟಾಕ್‌ನಲ್ಲಿದೆ
ಪೂರ್ಣ ವಿವರಗಳನ್ನು ವೀಕ್ಷಿಸಿ

HP Vaahn High-Performance PTFE Chain Lubricant Spray

Advanced Anti-Wear PTFE Formula | Zero-Fling Tech | Ultimate Protection for O-Ring, X-Ring & Z-Ring Chains

Unlock smooth, quiet power delivery and elite drivetrain defense with the HP Vaahn High-Performance PTFE Chain Lubricant. Engineered using advanced polytetrafluoroethylene ($PTFE$) technology and specialized anti-wear additives, this professional-grade chain lube is purpose-built for fast-moving motorcycle components subjected to extreme pressures, high RPMs, and severe chassis vibrations.

When riding at high speeds, cheap chain lubes instantly fling off onto your rear wheel and undertail, leaving your drivetrain dry and exposed to catastrophic wear. HP Vaahn features an ultra-cohesive, quick-drying bond that locks onto the metal surface, creating a super-slick micro-barrier that drastically reduces mechanical friction and heat.

Key Features & Advanced Engineering

  • Premium High-Gloss PTFE Formula: Infused with micro-ceramic $PTFE$ particles that fill microscopic imperfections on metal surfaces, delivering ultra-low friction coefficients and smoother shifting.

  • Engineered for High-Pressure & Vibration: Formulated to cushion rollers and pins against severe shock loads, reducing chain stretch and preventing sprocket tooth deformation under aggressive acceleration.

  • Guaranteed No-Fling Technology: Goes on wet to penetrate deep inside the chain rollers, then rapidly cures into a highly viscous, non-sticky structural film that refuses to fling off at high speeds.

  • Quick-Drying Dust & Dirt Barrier: The fast-evaporating carrier fluid ensures the lubricant sets quickly, preventing loose dirt, sand, and track-day grime from sticking to the chain and forming an abrasive paste.

  • 100% O-Ring, X-Ring & Z-Ring Safe: Completely chemically compatible with all modern rubber synthetic seals, keeping internal factory grease safely locked inside the links.

  • All-Weather & Thermal Resilience: Provides an absolute shield against moisture, road salt, and rust while maintaining its structural consistency across extreme temperature cycles—from freezing winters to searing engine bay heat.

Step-by-Step Application Guide

For maximum component life and zero mess, follow this routine every 500 km:

  1. Ensure the chain is thoroughly cleaned (using HP Vaahn Eco-Friendly Chain Cleaner) and completely dry.

  2. Place the bike on a paddock stand with the engine turned OFF.

  3. Manually spin the rear wheel and spray the lubricant directly onto the inner side of the chain, targeting both rows of rubber seals and the center rollers.

  4. Wipe away any excess overspray with a clean microfiber towel.

  5. Crucial Tip: Allow the lubricant to cure for at least 15 to 20 minutes (or ideally overnight) before riding to activate the no-fling bonding agents.

Product Specifications

Feature Details
Product Type Heavy-Duty Aerosol Drivetrain Lubricant
Active Additive Micro-Fine Polytetrafluoroethylene ($PTFE$)
Seal Compatibility Fully Safe for Standard, O-Ring, X-Ring, and Z-Ring Chains
Viscosity Trait High-Penetration Liquid to High-Adhesion Cured Film
Weather Defense Waterproof, Anti-Rust, and Anti-Corrosion Shielding
Primary Target Super Sports, Adventure Tourers, Nakeds, and High-Performance Scooters

Why Choose HP Vaahn PTFE Chain Lube?

A poorly lubricated chain steals horsepower, burns extra fuel, and causes noisy riding. Generic multi-purpose sprays lack the sheer strength needed to survive a motorcycle’s rear sprocket environment. The HP Vaahn PTFE Chain Lubricant bridges the gap between everyday commuter convenience and track-day performance. It keeps your drivetrain running smooth, quiet, and cool, saving you from expensive premature chain replacements.

Stop the power loss and lock down permanent drivetrain protection. Add HP Vaahn High-Performance PTFE Chain Lube to your garage setup from Bikenbiker today!


Country of Origin: India
Generic Name: Oils & Lubes
Quantity: 1N
Country of Import: India
Warranty: No warranty applicable
Best Use Before: 10 years from date of manufacture
Importer Address: HP Vaahn Kemetyl India Markets Private Limited 84/3, Rampura, Avalahalli Main Road, Bengaluru, Bengaluru Urban Karnataka – 560049 Customer Service Manager (at above address) Phone: +91 844 844 9050 Email: customercare@bikenbiker.com

ಹೊಸದಾಗಿ ಸೇರಿಸಲಾಗಿದೆ

1 25
ಎಲ್ಲವನ್ನೂ ವೀಕ್ಷಿಸಿ